The finest efficiencies possible can be achieved with this series of Paint Arrestors. This performance is achieved through the use of a high-density polyester backing which is structurally very strong. Due to the high efficiency, only one roll or pad layer is necessary.
PAINT ARRESTOR IDENTIFICATION
PA Model: 3300 Series Spra-Gard High Efficiency RP Paint Arrestor
RP Part #: 3332 Single Layer (20”x20”)
Number of pads in series: 1
TEST INFORMATION
Paint Description: High Solids Baking Enamel (S.W. #1 Permaclad 2400, red)
Paint Spray Method: Conventional Air Gun at 40 PSI
Spray Feed Rate: 143 grains/min. 135 cc./min.
Air Velocity: 150 FPM
TEST RESULTS
Initial Pressure Drop of Clean Test Filter: 0.06 in. wg
Final Pressure Drop of Loaded Test Filter: 0.50 in. wg
Paint Holding Capacity of Test Filter: 2575 grams = 3.3 lb.
Average Removal Efficiency of Test Filter: 99.65%
Inventory Last Updated: Dec 24, 2024