Products

600 FPM at 1.35" W.G. 99.97 efficiency High Capacity HEPA Filter

Ultrafine microglass paper media Anodized extruded aluminum cell sides Gaskey seal, gel seal and knife edge models Continuous bead mini-pleat adhe...

The PreVent® System Custom-fit to stop airborne debris before it ever gets inside any air intake.

Revolutionary, patented NanoWave® synthetic media High mechanical filtration performance over the life of the filter High loft media optimized for...

This state-of-the-art 2” filter allows facility engineers to improve air quality and increase IAQ levels without system modification. Available i...

Available in standard and high capacity in a nominal 1″ or 2″ depth. Achieves MERV 8 Virtually eliminates shipping damage No RoHS risk (heavy meta...

CONSTRUCTION: Heavy 16 gauge Galvanized Steel is standard on the NS-100 Filter Holding Frame. Ludwig Clips and a Foam Gasket are included in the p...

The NS 50 FILTER HOLDING FRAME is the economical version of the NS-100. This Holding Frame is designed for small banks and individual uses where a ...

Exceeds NESHAP requirements for new sources (3 stages) Multiple pockets available Three stage NESHAP for New Booths

Exceeds NESHAP requirements for existing booths Unique latex backing Self-Sealing, no clips required Two stage NESHAP for New Booths

Exceeds NESHAP requirements for existing booths Inside tackifier for drier particulate Self-Sealing, no clips required Two stage NESHAP for New B...

Exceeds NESHAP requirements for new sources (3 stages) Multiple pockets available Three stage NESHAP for New Booths

Exceeds NESHAP requirements for existing booths Multiple pockets available Metal header frame. Clips required Two stage NESHAP for New Booths

Select from a wide variety of paint overspray collection medias Fiberglass Stackguard® polyester backed fiberglass Type AG/PS polyester Expanded p...

Common sizes available 

Synthetic fiber media 1/2", 1", 2" thicknesses Rigid, self-supporting Washable • 50 -65% arrestance

Type HD - Steel Construction Type HS - Aluminum Construction Washable for repeated use Ideal for high moisture or high velocity conditions 60 - 7...

1", 2", 4" thicknesses Die cut beverage board frame 100% synthetic media 14.3 pleats per foot (2") 35 - 40% efficiency, MERV 11

Commonly used as replacement for fiberglass or paper padsHigh performing cost effective 92.4% removal efficiency Offered in blankets, pads, and bu...

MERV 7 Low resistance Polyester Media - Open construction Available in 1/2" "wrap" construction

100% Polyester Paint & glue overspray, sanding dust 99.6% removal efficiency Offered in blankets, pads, and bulk rolls Can be used as a Prefil...

We provide replacement filter elements, cartridges, and strainer baskets for hundreds of brands worldwide. Japanese Amada Daiei Daikin Fuji JSW Ko...

Trion Air Bear (MERV 8) Honeywell (MERV 8) ***Sizes to fit all major models***

Available in a MERV 10, 11, 13 and 15 Box-style and single header available 6” or 12” depths Galvanized steel frame Can be used as a pre-filter or...

CONSTRUCTION: Standard Frame is made from Rigid 24 Gauge Galvanized Steel, commercially known as Hot Dip G-90. There are two back grids available:...

Antimicrobial treated media Available in panels or links Moisture resistant Polyester Designed to remove dust, mold, pollens, and spores 85-90% Ar...

The Sentinel Fan Filter Unit is designed for optimum performance and energy savings. The unit operates at only 185 watts, with a low noise level o...

Available in nominal depths of 1″, 2″ and 4″ Achieves MERV 11 Low initial pressure drop Initial efficiency is over 2 times greater than tr...

Available in nominal depths of 1″, 2″ and 4″. High Capacity achieves MERV 10 Standard Capacity achieves MERV 8 Extremely low resistance to air-fl...

Available in a MERV 5 and 6 1” 2” 4" Low pressure drop Disposable, easy to use, low service cost All filters wrapped and sealed in protective p...

Available in a MERV 11; 1”, 2” and 4” filter Low pressure drop Disposable, easy to use, low service cost All filters wrapped and sealed in protec...

For use in Farr® HP Series systems Deep pleated media design Collapsible for compact shipping and storage Three depths 8" 12" 24" Four efficienc...

Design for applications with high humidity or varying temperature conditions 2-ply & 3-ply options Excellent pre-filter 2-ply MERV 6 3-ply MER...

Series S was developed as a solution to the higher efficiency challenges that coating sprayers deal with on a regular basis. This product combines...

Holds filter media pads Sized to fit inside Uni-Lok, Type AG-8 or other manufacturers' brands of filter holding frames 22 gauge galvanized steel f...

16 gauge steel construction Adaptor flanges to match up air handling units 2" pre-filter or after filter track

Available in 10"-60" sections

Available in a wide range of sizes, depths and number of pockets. Available as a MERV 11, 12, 13 and 15 Open throat design for optimum air flow L...

The RP Spra-Cube extended surface cubes are the latest in RP’s storied line of high-efficiency spray booth filters. Each cube is designed to provid...

The RP Spra-Cube extended surface cubes are the latest in RP’s storied line of high-efficiency spray booth filters. Each cube is designed to provi...

The RP Spra-Cube extended surface cubes are the latest in RP’s storied line of high-efficiency spray booth filters. Each cube is designed to provid...

Select from three choices of medias 1/2" 1" 2" Made from multi-denier, recycled polyester fibers Tackifier increases particle retention 85-95% a...

Select from three choices of media thicknesses 1/2" 1" 2"  Made from multi-denier, recycled poly fibers Tackifier increases particle retention 8...

Three-ply media construction 15" deep with a choice of 2 pockets 3 pockets 4 pockets MERV 8 (35040%) efficiency

35-40% efficiency, MERV 8 3 ply media construction 15" deep available in 2 pockets 3 pockets 4 pockets Self Sealing

1/2" or 1" thickness Scrim mesh netting backing for high tensile strength Dry and tackified medias 70-90% arrestance ***Choose from several styl...

MERV 8 Performance Polyester media with tackifier Self Sealing Available in 1/2" "wrap" construction